Master Barber in Stuart, Florida with 10+ years of experience specializing in men’s haircuts.
01
Talk
Bring a few pictures and tell me what you do and don’t like about your current cut. I look at your head shape, your hairline and the way your hair grows before anything gets cut.
02
Blend
Then I cut it. A fade placed where it suits you, or shears through a longer cut: a textured crop, a mod, a mullet, a blowout, a gentlemen’s cut. It should look right from every angle.
03
Line
Then I clean it up: lineup, temples, neckline and beard. Sharp and tight, or soft and natural — whatever you’re going for. You walk out looking like you meant it.
Sage
The menu
Services
Every service starts with a quick talk about what you want. Prices and times are shown when you pick a slot.
Where a fade starts changes the shape of your whole head. Keep going past the burst for the longer cuts: undercut, textured, mod, scissor, a gentlemen’s trim, a mullet.
Fade starts
Fades
Longer than a fade
Taper fade. Just the edges.
Cleans up the sideburns and neckline only and leaves natural weight on the sides. The most subtle option, and it grows out the cleanest.
Good for
Professional looks, longer tops, curls, first-timers
Ask for
“Low taper, keep the sides full, clean up the neck and sideburns.”
Low fade. Weight stays where it helps.
Starts just above the ear. Keeps darkness and shape around the sides, which balances a longer face and stops the head from looking narrow.
Good for
Long or oblong faces, textured crops, slick backs, mullets
Ask for
“Low fade, start it just above the ear.”
Mid fade. The all-rounder.
Starts around the temple. Takes out more weight while still holding structure, and works on almost every head shape. When in doubt, it’s the safest bet.
Good for
Oval and square faces, most hair types, everyday cuts
Ask for
“Mid skin fade, blend it into the top.”
High fade. Maximum contrast.
Starts up near the parietal ridge, the widest part of the head. Shows more of your head shape, sharpens the contrast and makes the top look taller.
Good for
Round faces, strong jaws, short tops, buzz cuts
Ask for
“High skin fade, keep some length on top.”
Burst fade. Curves around the ear.
Fades in a half-circle around the ear and drops at the neckline, so the back keeps its length. One of the cleanest choices for curly, wavy and textured hair.
Good for
Curls, waves, modern mullets, mohawk-style tops
Ask for
“Burst fade around the ear, keep the back.”
Undercut. A hard line, on purpose.
The sides and back come off short, and the top stays long enough to comb, push, or part. This one is not a blend. The line is the cut.
Good for
Straight and fine hair, side parts, a sharper everyday look
Ask for
“Undercut, hard line, leave the top long enough to comb.”
Textured cut. Piecey, not polished flat.
Length on top and through the sides, cut so it separates instead of sitting in one sheet. Cropped or a little longer. The lived-in cut a lot of straight and wavy hair actually wants.
Good for
Straight and wavy hair, textured crops, low-maintenance length
Ask for
“Textured cut, point-cut the top, keep it piecey.”
Mod cut. Rounded, and grown out on purpose.
A scissor cut with weight through the sides and back, usually covering the top of the ear, textured so it moves. The shape is round. The length is the point.
Good for
Straight and wavy hair, anyone who wants length without a fade
Ask for
“Mod cut, scissor the sides, keep it rounded and textured.”
Scissor cut. Shears, not clippers.
A full scissor cut. Natural weight on the sides, the ends shaped, and the neckline cleaned with shears instead of taken to skin. This is the longer trim most people mean when they say they just want a haircut.
Good for
Fine and straight hair, office cuts, anyone who does not want a fade
Ask for
“Scissor cut, keep the length, just shape it and clean the neck.”
Blowout. Low fade. Long top.
A low taper through the sides and back, then a long rounded top with real contrast between them. The top has the weight of a mod. The bottom is the fade.
Good for
Straight and wavy hair, a long top with a tight bottom
Ask for
“Blowout, low fade, leave the top long and rounded.”
Gentlemen’s cut. The classic trim.
Longer on top, scissor-cut sides, and a tapered neck. It reads like a proper haircut, not a fade. The kind of cut you can comb, part, or leave alone.
Good for
Straight hair, side parts, professional settings, low upkeep
Ask for
“Gentlemen’s cut, scissor the sides, taper the neck, leave the top.”
Mullet. Short sides. Even through the back.
The sides fade off and the back stays long, cut straight across so the hem is one line. Textured through the length, wider than a tail.
Good for
Wavy and straight hair, modern mullets, growing the back out
Ask for
“Modern mullet, shorter sides, leave the back.”
Still not sure? That’s what the first five minutes in the chair are for.
Push your hair off your forehead and look straight into a mirror. Compare your forehead, cheekbones, jaw and the length of your face. Then tap the shape you’re closest to. It’s a starting point, not a rulebook. We’ll finish the thinking in the chair.
Oval face
Longer than it is wide, with a jaw a little narrower than your cheekbones.
You have the most freedom of any shape. Experiment.
Cuts that tend to work
Low, mid or high fades
Taper fades
Textured crops
Pompadours
Slick backs
Side parts
Quiffs
Watch out for A heavy fringe hanging straight down can shorten the face.
Round face
Similar width and length, softer angles, fuller cheeks.
Add height on top and keep the sides tight to lengthen the face.
Cuts that tend to work
High or mid fades
Pompadours
Quiffs
Textured tops with height
Brush-ups
Side parts
Watch out for A wide, rounded shape with full sides can emphasize roundness.
Square face
Broad forehead, strong jaw, similar width all the way down.
Show off the structure, or soften it with texture on top.
Cuts that tend to work
Buzz cuts
Crew cuts
Skin fades
Mid fades
Textured crops
Slick backs
Watch out for Nothing much. A square face can handle very short hair.
Oblong face
Noticeably longer than it is wide; forehead, cheeks and jaw similar widths.
Keep some fullness on the sides so the face doesn’t look longer.
Cuts that tend to work
Low fades
Taper fades
Scissor-cut sides
Textured crops
Fringe
Side-swept styles
Watch out for Lots of height on top with very short sides makes it look longer.
Diamond face
Cheekbones are the widest point, with a narrower forehead and jaw.
Add some width at the forehead and keep weight at the temples.
Cuts that tend to work
Textured fringe
Messy medium-length
Side-swept hair
Scissor cuts
Low tapers
Watch out for Very tight sides can make the cheekbones look even wider.
Heart face
Wider forehead that narrows down toward the chin.
Balance the top and bottom halves. Don’t exaggerate the difference.
Cuts that tend to work
Textured fringe
Medium-length styles
Side-swept styles
Low tapers
Natural texture
Watch out for A slicked-back top, or a lot of height with nothing at the temples, makes the forehead look even wider.
Triangle face
Wider jaw with a narrower forehead. The opposite of a heart.
Build volume up top and at the temples to balance a strong jaw.
Cuts that tend to work
Textured quiffs
Pompadours
Side parts with volume
Messy textured tops
Longer styles with movement
Watch out for Flat, tight tops make the jaw look wider.
Add a photo, tell it the cut you’re after — it previews right here. Free, about 15 seconds, no signup.
A copy of your preview may go to Sage — it is never posted publicly.
Regulars start young
Meet your barber
I’m Sage.
A barber in Stuart, Florida, cutting for the Treasure Coast for more than ten years.
For me, barbering has always been about more than just a simple haircut. It’s about getting to know the person in my chair, understanding exactly what they’re looking for, and helping them find a style they feel confident in.
I work with all hair types and have mastered a wide range of styles, from clean fades, tapers, blowouts, flat tops, and straight razor lineups to textured cuts, layered styles, mod cuts, mullets, pompadours, comb-overs, and classic gentlemen’s trims with hot towel shaves.
Whether you prefer a sharp, defined look or a softer, more natural scissor cut, I take pride in providing the best experience and delivering a flawless result exactly the way you want it. I take the time to listen and make sure we share the same vision before I pick up the clippers. If you’re unsure what style would suit you best, I’m happy to use my experience and skills to guide you toward a look that complements your head shape and lifestyle.
My goal is simple: to give you a flawless haircut that fits your style and image, and have you leave my chair feeling your best again.
Stuart2–10 minDowntown, on S Colorado Ave. Free parking.
Palm City≈ 10 minStraight across the river on the Palm City Bridge.
Jensen Beach≈ 15 minSouth on US-1 over the Roosevelt Bridge.
Hobe Sound≈ 20 minNorth on US-1 through Port Salerno.
Port St. Lucie≈ 25 minSouth on US-1 or I-95 into Stuart.
Jupiter≈ 35 minNorth on I-95 or US-1 into Martin County.
Questions
Good to know
Where is Sage The Barber?
Inside El Barbershop at 612 S Colorado Ave, Stuart, FL 34994, in downtown Stuart (Martin County). There’s free parking. Tap “Directions” anywhere on this site to open it in Google Maps, Apple Maps or Waze.
What are your hours?
Tuesday to Friday, 10 AM to 6 PM. Saturday, 8:30 AM to 6 PM. Closed Sunday and Monday.
Do you take walk-ins?
Yes, walk-ins are welcome. Appointments are recommended so you don’t wait, especially on Saturdays. Book online in under a minute, or call or text (561) 371-5315.
How do I book?
Tap “Book now” to pick a service and time online. You can also call or text (561) 371-5315.
I don’t know what haircut to ask for. Is that okay?
Completely. Bring a few pictures you like, tell me what you do and don’t like about your current cut, and we’ll choose something that works with your head shape, hairline and hair type before I start.
Do you cut curly and textured hair?
Yes. Burst fades and curly tapers for curls. For straight and wavy hair, scissor cuts, textured cuts, mods, blowouts, gentlemen’s cuts and mullets. I cut for how your hair actually grows.
How much is a haircut?
Haircuts start at $45, haircut and beard at $60, kids’ cuts (12 and under) at $40, and a beard trim or edge-up is $20. You’ll see the exact price when you book.
Do you cut kids’ hair?
Yes. Kids and teens are welcome, from first fades to school-picture cuts. Kids’ cuts for 12 and under start at $40.
Is there parking, and how can I pay?
There’s free parking at the shop. Cash, debit, Visa, Mastercard, Discover and American Express are all accepted.
Which areas do you serve?
Clients come in from Stuart, Palm City, Jensen Beach, Port St. Lucie, Hobe Sound, Jupiter and all over the Treasure Coast.